Maximum-profit equilibrium: monopoly
1. If an industry is to be classed as one of pure (or perfect) competition, there are said to be two basic requirements.It is argued that when these two conditions are satisfied, the result is, for the individual firm, a demand curve that is virtually horizontali.e., perfectly or almost perfectly elastic with respect to price. The firm is free to sell as much or as little as it pleases at a market price over which it has no control.
Very few real-life firms find themselves in this position. This is because (so the present chapter argues) of failure to satisfy one or both of the two basic requirements for perfect competition. In real life, that is, the number of firms may be too (large/small) for perfect competition. In addition, the products sold by the various firms may be (identical among all firms/differentiated from one firm to the next).
(i) many small firms, (ii) all selling identical pro-ducts:
small: differentiated from one firm to the next.
2. These two characteristicsa too-small number of sellers and/or the differentiation of the competing productsare said to have "monopolistic" consequences.
Notice that this word "monopolistic" does not mean that the firms involved are monopolies. The conventional definition of a monopoly situation is this: (i) only one firm in the industry, and (ii) no close substitutes available for the product of that one-firm industry.
Except in a few special areas such as public utilities, cases approximating genuine monopoly are almost as difficult to find as are cases of perfect competition. Monopoly is a kind of extreme instance of competitive imperfection. Economist Edward H. Chamberlin, who did much to develop the ideas set out in the first part of this chapter, argued that the typical real-life situation is one of "monopolistic competition." Each firm finds that it must reckon with the competition of close substitute products (so that it is not a monopoly); and yet its situation is not that of pure or perfect competition.
The word "monopolistic" is used because it is argued that there is one monopoly-like characteristic to be found in all such cases of monopolistic or imperfect competition. less than perfectly elastic with respect to pricei.e., it is "tilted" rather than horizontal.
3. If the number of selling firms is small, the name given to the resulting situation is
If the number of selling firms is large, but competition is not perfect, this must be (in the language of the text) a situation of oligopoly: many differentiated sellers.
In its opening sections, this text chapter describes the circumstances of imperfect or monopolistic competition. But it does not attempt to explore these situations in any real detail. Instead, after its introductory outline, the chapter turns to an examination of the profit-maximizing behavior of a monopoly firm. Analytically, this monopoly case is decidedly easier than the so-called "intermediate" casesthose not perfectly competitive, and yet not completely monopolistic. It would be unwise to tackle these more intricate cases before having mastered the elementary ideas of monopoly pricing.
Even the terms and diagrams involved in a description of monopoly pricing may seem complicated at first. Yet the basic idea involved is simple. The monopoly firm is assumed to behave so as to "maximize its profit"which is exactly what the firm in pure (or perfect) competition was assumed .The monopoly firm simply operates in rather different circumstances.
To review the basic ideas of "profit maximization":
1. "Maximizing profit" means making as much money as supply conditions will permit.
2. To "maximize profit," there must be something the firm can do that will influence its profit. There must be some variable which changes profit, and which the firm can control.
3. This chapter assumes that the monopoly firm can control the quantity it sells, just as the firm in pure (or perfect) competition can do. (In real life, this control is at best indirect and incomplete; there are other and more complex decisions to be made. But this chapter tackles a simple case.) So the variable which the monopoly firm can control is its sales quantity: it looks for the particular sales quantity that will maximize its profit.
4. The monopoly firm is assumed to have control over its sales quantity because it knows the demand schedule for its producti.e., it knows the sales quantity that goes with each and any price it might charge.
5. From this demand schedule, it is easy to develop a revenue schedule (Total Revenue being quantity sold multiplied by price per unit)i.e., a schedule showing revenue associated with each possible quantity sold.
6. The firm must know also the Total Cost of each and any output quantity. By bringing together the revenue and cost schedules, it can then identify that output quantity at which the excess of revenue over cost (profit) is greatest. (And it can tell the price to charge for this Maximum-profit output just by consulting the demand schedule once again.)
To repeat, the essential thing to grasp about this sequence of ideas is that it is simple. It is only when the monopoly firm's profit-maximizing "equilibrium position" (with respect to sales output and price) is outlined in marginal terms that it may seem complicated. But these marginal terms are essential analytic tools when one moves on to more complex situations. Hence the emphasis on Marginal Revenue and Marginal Cost in the text chapter and in the review questions which follow.
4. Columns (1) and (2) of Study Guide Table 1 represent a demand schedule. This schedule has been computed or estimated by a firm as indicating the quantities it can sell daily at various prices.
This firm must operate under conditions of (perfect/imperfect) competition, since as the output to be sold increases, price (remains constant/must be reduced).
5. We treat the first two columns of Table 1 as representing a monopoly firm's demand schedule. Our task is to determine what price the monopolist will charge, and what output it will produce and sellif its objective is Maximum-profit.
o. Column (3) of Table 1 shows Total Revenueprice times quantity. Complete the four blanks in this column.
Then use Columns (2) and (3) figures to illustrate Total Revenue on Study Guide Fig. 1i.e., show Total Revenue associated with various output quantities. Join the points with a smooth curve. Disregard momentarily the TC curve already drawn on Fig. 1.
с. Notice that this demand schedule becomes price-inelastic , when price is sufficiently loweredspecifically, when price reaches $(8/7/6/5/4).
The graph of Columns (1) and (2) of Table 2 is already drawn on Fig.1 as a Total Cost curve (TC). (Mark the curve you drew in question 5 as TR, to distinguish it from the cost curve.)
It is now possible to see at once why the profit-maximizing process outlined here is a simple one. The firm is doing nothing more than to search for the output at which the vertical distance between TR and TC is greatest. This distance, for any output, is (fixed cost/price/profit or loss). (If TR is above TC, it is profit; if TC is above, it is loss.' So it is preferable to look for "greatest vertical distance" with ГД above TC. The greatest distance with ГС on top marks the maximum-possible loss, which is somewhat less desirable as an operating position.)
6. Figure 1 is too small to indicate quickly the precise Maximum-profit position. But even a glance is sufficient to indicate that this best-possible position is approximately i.45/65/85) units of output.
The firm can be thought of as gradually increasing its output and sales, pausing at each increase to see if its profit position is improved. Each extra unit of output brings in
a little more revenue (provided demand has not vet moved to the price-inelastic range); and each extra unit incurs a little more cost. The firm's profit position is improved if this small amount of extra revenue (exceeds/is equal to/is less than) the small amount of extra cost.
More elegantly put, output should be increased, for it will yield an increase in profit, if Marginal Revenue (MR) (exceeds/is equal to/is less than) Marginal Cost (MC). The firm should cut back its output and sales if it finds that MR (exceeds/is equal to/is less than) MC.
And so the "in-balance" position is where MR is (less than/equal to/greater than) MC.
7. A more careful development of the Marginal Revenue idea is needed. Column (4) in Table 1 shows the extra number of units sold if price is reduced. Column (5) shows extra revenue (positive or negative) accruing from that price reduction. Complete the blanks in these two columns to familiarize yourself with the meanings involved.
8. The general profit-maximizing rule is: Expand your output until you reach the output level at which MR = MCand stop at that point.
The profit-maximizing rule for the firm in pure (or perfect) competition: P = MC. This is nothing but a particular instance of the MR = MC rule. It is assumed in pure (or perfect) competition that the demand curve facing the individual firm is perfectly horizontal, or perfectly price- (elastic/inelastic}. That is, if market price is $2, the firm receives (less than $2 /exactly $2/more than $2) for each extra unit that it sells. In this special case, MR (extra revenue per unit) is (greater than/the same thing as/less than) price per unit (which could be called Average Revenue, or revenue per unit). So in pure (or perfect) competition, P == MC and MR = MC